OFFICIAL DDMD1 Gingerbred 2.3.6 for Galaxy Y Duos [GT-S6102]

I have Seen many a times that People face problems in their SMARTPHONE Samsung Galaxy Y Duos Like Force Close, App Hangs Over and Phone Restarts after More Enough Time, Media Scanning Issue and so on.. and inorder to sort them out people generally visit Samsung Service Centre and spend a Couple of Bucks on to sort it up but now no need of it 'coz I brought the Official Firmware of Samsung Galaxy Y Duos with all the Bugs Fixed up!!
This Update is Released For Indian Region Which Has Baseband Version DDMD1.This Will Be The Third Gingerbread 2.3.6 Update For Samsung Galaxy Y Duos S6102.This Update DDMD1 is Also Available Through Kies For India.But Those Who Want To Get This Update On Their Galaxy Y Duos (Irrespective of Region) Can Also Apply The Same(Manually) By Following The Step By Step Procedure Given Below.

I have seen that there are numerous official firmware packages available on other search sites claiming official but the versions are actually pirated which could not fix up the bugs and henceforth forces the system to forceclose the applications. So I request not to go on for versions which does not meet the system demand.. But over here I got the official which I got from the service center and published over on my Dropbox Account after flashing on my own phone.



Essential Steps Before Updating Firmware:
  • You Must Enable USB Debugging By Checking the Box in your device by Following the Path Below:

Settings -> Applications -> Development -> USB Debugging

  • It is highly Recommended to Backup all Your data Stored in your phone So as to Restore it back just in case If You Lose or Corrupt the Data During this Process.

  • Your Device Must be Charged up to 80% or Above Battery Level to Ensure that Your Device should not be Turned Off During this Process.

  • It will be Recommended to Temporary Disable Security Tools as well as Antivirus Installed on your Computer as This might Interrupt the Process.
By Assuming that you have followed all the instructions mentioned in Essential Steps Before Updating Firmware, You are Now Ready to proceed to Further Article where we will check How To Apply Gingerbread 2.3.6 DDLD4 Firmware Update in your phone.
Procedure To Update Samsung Galaxy Y Duos I6102 With Gingerbread 2.3.6 DDMD1:

  • Firstly You Need To Download The Two Files Mentioned Below.
 
  1. Galaxy Y Duos GingerBred 2.3.6
  2. Odin Multi Downloader [Supports All Samsung SmartPhones]
  • Extract Galaxy Y Duos I6102 Gingerbread 2.3.6 DDMD1Package Files. You’ll Find two files shown in the image below.



  • Turn Off Your Phone & Now Enter Into The Downloading Mode.Downloading Mode Can Be Entered By Holding Power Button + Home Button+Volume Down Button Simultaneously.

  • After Entering Your Phone Into The Downloading Mode, Connect Your Phone To The Computer.

  • Now Open Odin Multi Downloader Which You’ve Just Downloaded in Your Computer.By This Time ID:COM Section Should be Turned Yellow.If It isn’t Then You Need To Install Drivers in Your PC By Downloading Them From The Link Given Below.
        
Windows 64 Bit




  • Select PDA Tab & Then Choose the extracted the .tar.md5” File.(See The Image Below)


  • [Deselect the AUTO-REBOOT Option which is just below the ID:Com]
    Start The Process By Pressing Start Button.

  • Wait Until Process Overs (Flashing Process Will Be Done Within 5-7 Minutes). As Soon As Process Done, You will See That The ID:COM Section is Turned Green Giving The Message “Pass”.

  • After Getting “Pass” Message, Disconnect Your Phone From The PC.

  • Again Switch Off Your Device.Now You Need To Enter Into The Recovery Mode. The same can be Entered By Holding Volume Up + Home Button + Power Button Simultaneously.
Note: In Recovery Mode, Touch Will Not Work, Therefore Use Volume Up & Down Keys And Menu Button to Navigate Accordingly.
  • As Soon As You Enter Into The Recovery mode, Select Wipe Data/Factory Reset & Wipe Cache Partition

  • Now Simply Reboot Your Device By Pressing “Reboot System Now”.
Tip: If Something Goes Wrong During Flashing Process i.e, If Process Fails Or Stuck, In That Case Unplug Your Device From Computer, Remove Battery Reinsert It.Again Enter Into The Downloading Mode & Repeat The Whole Process Again.
Congratulations !! By The Time You’ve Successfully Updated Your Samsung Galaxy Y Duos S6102 With Latest Gingerbread 2.3.6 DDMD1 Firmware Officially.Just Share Your Opinions & Reviews About This Update With Us in Comment Section Below.And In Case If You Face Any Difficulty During This Process, Do Not Hesitate To Report Me in Our Comment Section Below, I will Try to Fix Them In Next Couple Of Hours.
Disclaimer : We Have Made This Article Covering Each And Every Part At Our Level Best.In Case If Any Damage Happens to Your Device (It Should not Be), Neither We nor Samsung Electronics Ltd. will Be Held Responsible For It.

 


ENJOY..!!!

14 comments:

Ajay Gantyala said...

how to download Galaxy Y Duos GingerBred 2.3.6

Ajay Gantyala said...

how can iGalaxy Y Duos GingerBred 2.3.6 download

Nihar Ratadia said...

Bro thanks for spending your precious time on my blog.. You may find the download link placed in the middle of the post just after the disclaimer or To-Do steps just before flashing up the Update Patch...
If you still dont find the download link I place it for you-->>

2.3.6 Gingerbred Patch- " http://www.hotfile.com/dl/155853189/969d751/S6102DDLD4_S6102ODDLD2_INS.zip.html"

Odin Multi Downloader :- "http://www.androidlegend.com/dl/Odin307.zip"

&

Windows 64-Bit drivers:- "http://drivers.softpedia.com/dyn-postdownload.php? p=96693&t=4&i=1"

If you still Require any help from me I it would be my pleasure to serve...

If you find your issue sorted..
^_^ Keep Visiting my Blog..

Naveen Kumar Kudikala said...

seems Hotfile.com was shutdown.

Can you please help me with 2.3.6 Gingerbread to download

Nihar Ratadia said...

Thanks for visiting to my blog.. I apologize u that seemed error in hotfile as it is violated the US Act and has been closed.. I would upload the download file to a new storage box and would get to u soon.. Till that you may visit my other posts and enjoy the upgrades done on your device.

Anonymous said...

hello bro ........ur link is not opened because hotfilesite was blocked..please send me another link where i can download firmfare

Nihar Ratadia said...

Bro I am sorry I couldn't rectify the link but however on one of our anonymous's comment I have sucessfully changed the link with one of the active cloud storage site!
So keep visiting, enjoying my blog and be updated by following us on our facebook fan page!

Anonymous said...

thanks bro....i have downloaded it..its a good blog i have seen........

Anonymous said...

does internet needed while updating ?:

Anonymous said...

I got three .tar.md5 files when i extracted the ddm1.zip...those are cda.tar.md5,pda.tar.md5,modem.tar.md5..so what should i do sir?

Nihar Ratadia said...

Don't call me sir bro.. i would be probably of your age. However the File Sxtention as .tar.md5 should be selected in Odin PDA section. If you still find issue then you may please follup! It would be pleasure to sort the issue..

Nihar Ratadia said...

No bro you don't require an internet access on your Galaxy Y Duos or on your pc/laptop while flashing! However you need the Internet for the Download firmware package..:p

Lukesh Mendhe said...

How i can download gingerbread files separately ?

Nihar Ratadia said...

Separately???